12-inch diameter machined electroplated steel diamond grinding disc that attaches to a potters wheel like a bat. Both sides of the thin discs have a diamond grinding surface, one medium/coarse (120 grit), and the other fine (400 grit).
Just flip the disc over to change grits. Both sides are separately replaceable. Use with water. Two 12" discs back to back, combined as one 220 square inches of total grinding area,
It works like a slower speed lapping disc or lap grinder and can be used to smooth gemstones and glass and sharpen tools. No assembly, it is ready to use. Works for high fired porcelain, stoneware or bisque.
Each disc is machined flat before electroplating for an even, very effective operation, and evenly distributed consistent grit particle size. Electroplated diamond tools vary wildly in quality. These are guaranteed to be the highest professional quality.
There are two options with this diamond grinding disc:
(1) 1/4"+ thick, which can be used with the regular bat pins you already have.
(2) 1/8"+ thick, which includes low head bat pins 1" in length, to attach the grinding disc. If your wheel requires 1 1/2 " bat pins, e-mail or phone and I'll send those instead. Regular bat pins will stick up above the surface.
Read more about the grinding discs here: https://sequoiapottery.com/diamond-abrasive-disc-information/
Shipping for this item is via USPS Priority Mail. If you want another shipper, or you are ordering from out of the US, please call 559-542-2203 and order by phone, or email at firstname.lastname@example.org.
This product hasn't received any reviews yet. Be the first to review this product!