This is a 12" diameter electroplated diamond grinding disc with the face completely covered with diamonds.
The back attaches directly to a potter's wheel with standard low head bat pins (included), 10" on center.
Ready to attach to your wheel and work, no assembly except to put the bat pins on the wheel. Medium to coarse grind, #120 grit for easy removal of material.
Works for high fired porcelain, stoneware or bisque. Each disc is machined flat before electroplating for an even, very effective operation, and evenly distributed consistent grit particle size. Electroplated diamond tools vary wildly in quality. These are guaranteed to be the highest professional quality.
Use with water.
Low profile to keep swarf (grinding water and material) in the splash pan of the potter's wheel. It is less that 1/4 inch thick. Use only the included special low-head bat pins to attach the disc to the potter's wheel . Regular bat pins will stick up above the surface.
This product hasn't received any reviews yet. Be the first to review this product!