Loading... Please wait...
  • 14 " X 1/4 " thick double sided disc in use
  • #400 side
  • Close up of "bat pin hole"
  • Close up of edge of disc

14 inch double sided grinding disc, 1/4 inch thick

8.00 LBS
Calculated at checkout

Click the button below to add the 14 inch double sided grinding disc, 1/4 inch thick to your wish list.


Product Description

14-inch diameter machined electroplated steel diamond grinding disc that attaches to a potters wheel like a bat. Both sides of the thin discs have a diamond grinding surface, one medium/coarse (120 grit), and the other fine (400 grit).

    Just flip the disc over to change grits. Both sides are separately replaceable. Use with water.  Two 12" discs back to back, combined as one 300+ square inches of total grinding area,   

    It works like a slower speed lapping disc or lap grinder and can be used to smooth gemstones and glass and sharpen tools.  No assembly, it is ready to use. Works for high fired porcelain, stoneware or bisque.  

    Each disc is machined flat before electroplating for an even, very effective operation, and evenly distributed consistent grit particle size.  Electroplated diamond tools vary wildly in quality.  These are guaranteed to be the highest professional quality.

There are two options with this diamond grinding disc:
(1)  1/4"+ thick, which can be used with the regular bat pins you already have.
(2) 1/8"+ thick, which includes low head bat pins 1" in length, to attach the grinding disc.   If your wheel requires 1 1/2 " bat pins, e-mail or phone and I'll send those instead. Regular bat pins will stick up above the surface.

Read more about the grinding discs here: https://sequoiapottery.com/diamond-abrasive-disc-information/
Shipping for this item is via USPS Priority Mail.  If you want another shipper, please call 559-542-2203 and order by phone.

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write a review