Loading... Please wait...
  • fine 600 grit diamond saturated pad
  • finer grit polishing pad, 1000#
  • A mug foot after polishing with both pads

Set of two diamond saturated polishing pads

0.80 LBS
$6.00 (Fixed shipping cost)

Click the button below to add the Set of two diamond saturated polishing pads to your wish list.


Product Description

DIAMOND SATURATED POLISHING PADS Two pads, fine (600 grit) and ultrafine (1000 grit)

This tough but flexible, sponge-like diamond saturated nylon/polyester pad fits on to a potter's wheel and quickly smooths finished ceramic to a  fine sheen.

Use with water.  Grind or sand off all rough edges before polishing with the pad.  Attempting to polish without removing sharp edges can damage the pat.  Use the steel diamond grinding disc or other devices to remove rough edges. Smooth the foot as much as possible prior to bisque for best results.
There is a  #600 grit (fine) and #1000 grit (superfine).  Use the #600 first and then the #1000 for a glossy very smooth glass-like finish, or you can use just one of them.  

You can devise a way to attach it to your own potter's wheel or use the hook and loop ("velcro type") device, which is recommended. (sold separately on this store, http://sequoiapottery.com/hook-and-loop-velcro-type-attaching-bat/, or http://sequoiapottery.com/magnetic-backed-velcro-type-attaching-disc/ ). Just center and press on the polishing pad to the hook and loop  (velcro type) disc.

12 inches in diameter, 1/2 inch thick, saturated throughout with industrial diamond particles.  Both sides can be used.

Guaranteed, money back, buyer returns at his/her cost.

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write a review